About this test kit
With this test kit, you can easily and reliably collect an anal swab yourself. Using the included return envelope, you can send the sample to the certified laboratory, where it will be analyzed. If you have any questions, you can always contact our helpdesk via the website.
Contents of the test kit
- 1 cotton swab
- 1 swab collection tube
- 1 swab barcode sticker
- 1 return envelope
- 1 holder for collection tube
- 1 instruction manual
- 1 protective bag with absorbent pad
Not complete? Please contact us.
Before you begin
- Do not perform the test if you have bleeding hemorrhoids, are menstruating, or feel unwell.
- Do not take the test if you have a fever or an acute infection (unless specifically testing for it).
- Avoid using medications or supplements shortly before the test.
- Preferably do not collect a sample on Friday or during the weekend due to longer shipping times. Send the sample preferably on the same day it is collected.
- If outside temperatures are below 4°C or above 25°C, drop off the package at a post office.
Important Information
- The test kit is for single use only.
- For anal swab collection only.
- For persons aged 18 years or older only.
- Keep out of reach of children.
- The included materials are intended for personal use only.
Getting Started
- Activate the kit using the information on the inside of the box.
- Remove the swab collection tube from the packaging and place the barcode sticker marked SWAB vertically on it.
Note
Place the barcode sticker vertically on the collection tube.
Anal swab
Step 1.
Wash your hands with soap for 30 seconds, rinse them thoroughly with warm water, and dry them well.
Step 2.
Unscrew the cap of the collection tube without touching the inside. Place the tube in the holder. Make sure the liquid remains inside the tube.
Step 3.
It’s important not to touch the cotton tip of the swab. Remove the swab from its packaging and hold it by the stem using your thumb and index finger.
Step 4.
Assume a relaxed position and gently separate your buttocks. Insert the swab about 3 to 4 cm into your anus. Gently move it back and forth along the walls of the anus for about 10 seconds, then remove it.
Step 5.
Insert the swab into the collection tube and carefully break it off at the break line.
Step 6.
Screw the cap tightly onto the collection tube to ensure it is properly sealed.
Shipping
Step 1.
Place the sealed collection tube (swab) into the provided protective bag with the blue adhesive strip, which already contains the absorbent pad. Seal the protective bag securely with the adhesive strip. Place the protective bag with its contents in the box and close the box.
Step 2.
Place the box in the provided return envelope and seal it with the adhesive strip. The package fits in a mailbox. If you hand it in at a post office, do not add track & trace, as this may delay the delivery. Shipping costs have already been paid.
Step 3.
Dispose of the remaining items in the appropriate waste bin. We will notify you by email as soon as your laboratory results are available.
Keep dry
For single use only
Avoid sunlight
Store between temperatures
Do not use if the packaging is damaged
Read the instructions for use
In-vitro diagnostics
European Conformity
Item number
Batch number
Expiration date
Manufacturer