About this test kit
With this test kit, you can collect a vaginal swab yourself. Using the included return envelope, you can send the material to the certified laboratory, where it will be analyzed. If you have any questions, you can always contact our helpdesk through the website.
Contents of the test kit
- 1 swab
- 1 swab collection tube
- 1 barcode sticker
- 1 return envelope
- 1 tube holder
- 1 instruction manual
- 1 activation card
- 1 protective bag with absorbent pad
Not complete? Please contact us.
Before you start
- Do not take the test if you have a fever or an acute infection (unless specifically being tested for it).
- Avoid using medication or supplements right before the test.
- Do not take a swab during menstruation.
- Preferably, do not collect a sample on Friday or during the weekend, due to longer shipping times. Send it on the same day of collection whenever possible.
- Outside below 4°C or above 25°C? Drop off the package at a post office.
Important Information
- The test kit is for single use only.
- For collecting a vaginal swab only.
- For persons aged 18 and older only.
- Keep out of reach of children.
- The supplied materials are intended for personal use only.
Start here
- Activate the kit using the details on the activation card.
- Remove the swab collection tube from the packaging and place the barcode sticker marked SWAB vertically on it.
Note
Place the barcode sticker vertically on the collection tube.
1Vaginal swab
Step 1.
Wash your hands with soap for 30 seconds, rinse them thoroughly with warm water, and dry them well.
Step 2.
Twist off the cap of the collection tube without touching the inside. Place the collection tube in the holder. The liquid must remain inside the tube.
Step 3.
It is important that you do not touch the cotton tip of the swab. Remove the swab from the packaging and hold it by the stick with your thumb and index finger.
Step 4.
Adopt a relaxed position. Insert the swab about 4 to 5 cm into your vagina, as you would insert a tampon. Move it gently back and forth along the walls of the vagina and remove it after 30 seconds.
Step 5.
Place the swab into the collection tube and gently break it off at the breakpoint.
Step 6.
Screw the cap tightly onto the collection tube to ensure it is properly sealed.
2Final check
Kit activated?
Use the codes on your activation card.
Barcode sticker applied?
Place the sticker vertically on the tube.
Below 4 °C or above 25 °C?
Drop off the package at a post office.
3Shipping
Step 1.
Put the sealed collection tube into the protective pouch with the blue adhesive strip, which already contains the absorbent pad. Seal the protective pouch securely with the adhesive strip.
Place the pouch with its contents into the box and close the box.
Step 2.
Put the box into the supplied return envelope and seal it with the adhesive strip. The package fits in a mailbox. If you drop it off at a post office, do not add track & trace, as this will delay shipping. Postage has already been paid.
Step 3.
Dispose of the remaining items in the designated waste bin. We’ll notify you by email as soon as the laboratory results are available.
Keep dry
For single use only
Avoid sunlight
Store between temperatures
Do not use if the packaging is damaged
Read the instructions for use
In-vitro diagnostics
European Conformity
Item number
Batch number
Expiration date
Manufacturer